The crank for lowering the spare tire is supposed to fit into a cylinder, which when turned counterclockwise is supposed to lower the spare. However, the cylinder appears to have no slot to fit the ...
1999 lx470 won't start. Looking for the killswitch car cranks just won't turn over
excessive cranking to start l x 470, 2000, after start, runs normal .... Unless you can hear the starter slipping and not engaging, your delayed start is most likely ignition or fuel related.If you ...
...TURNS ALL THE WAY OVER WITHOUT MAKING CONTACT.INSIDE THE IGNITION CASING BEHIND THE SWITCH,THE LINKAGE SEEM TO BE BROKEN.How do i repair this problem? The ignition crank shaft is broken inside the ...
...Steering Column Lock Assembly: 1999 Lexus LX470 Steering Column Lock Assembly (SCLA): My ignition crank shaft was broken inside the SCLA so I replaced the SCLA. I reattached the electronics to the ...
...when i put the key in to start,the key goes all around.doesnot say or do anything. The ignition crank shaft is broken inside the Steering Column Lock Assy. You will need to buy a new assy (cost ...
...turns over, it will crank ... if it is cranking, it is turning over. It may be cranking and thus turning over, but not starting, this is one kind of problem ... If it is not cranking, it is not ...
Why my crankshaft want turn but the starter and flywheel do Do you mean is wants to turn ......... ? English grammar please. hello Roy, Does the serpentine belt and pulleys turn when you crank it, ...
87 Ford ranger will not crank. it will turnover but will not crank. i changed the sylanoed but still won't crank Turning over & cranking is the same thing Check for fuel pressure at motor with
...but will not crank. Did crank motor turns over but will not crank. Did crank once run 20 min. turned it off hasn't started since? This cold be many things, howevewr, I would guess it's the fuel
107 questions posted
Usually answered in minutes!
74 Questions
29 Questions
29 Questions
30 Questions
26 Questions
