1999 Subaru Legacy "reset aftermarket alarm truck start" Questions

Ad

Question about Subaru Legacy

1 Answer

reset what to do when the alarm sounds when connecting the jumper cables to start Use remote to turn off alarm with all doors closed. the other is to have all doors closed and locked, then unlock from

Ad

Question about Subaru Legacy

2 Answers

...aftermarket battery(but highly unlikely). are your, "hazards" or "any" lights flashing? Do you have an alarm on your car? disconnecting the battery to replace it could have reset the alarm. Most of ...

Ad

...reset the alarm.
If its an aftermarket alarm system, look under plastic panel below steering wheel for a plastic black box that is about the size of a deck of cards, izip tied or just hanging with ...

...aftermarket Ford remote start on my 2005 Ford Sport Trac. I tried to start with my truck with the key in the ignition, I would hear clicks and then the alarm would go off. I have tried to reset the ...

Question about Subaru Legacy

2 Answers

reset, unfortunately you will need a Ford IDS, which most large shops have or your local Ford dealer. If it is the aftermarket alarm system that needs resetting, then you need and authorized dealer of

reset the alarm module because of that the car wont start so im just lost in this whole car. Im not sure if this is a factory alarm or aftermarket, try locking and unlocking the pass/side door and see

...aftermarket alarm with starter disable. By disconnecting the battery the alarm reset and the defualt setting is usually to set the alarm automatically (active arming). You have three options.. A. If ...

ignition switch. After disconnecting the alarm, the car wont start. Is there a reset on the alarm? if its an aftermarket alrm the alarm brain unit is on the floor with connectors jumping through them

...off never knew alarm was there and dont know how to reset it and car wont start notify old owner about alarm if its aftermarket ----if its the manufacturers then problem with key or ignition ...

...reset the alarm module with a scanner. If the alarm if aftermarket go to the control module and see if it has a reset button. FOBs (remote) can reset alarm. You Jeep is always set for break-in mode. ...

Not finding what you are looking for?
1999 Subaru Legacy Logo

487 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...