1998 Subaru Legacy "brake pedal position sensor 2010" Questions

brake pedal position sensor . The brake pedal position sensor is under the dash hooked to the brake pedal arm . You need a wiring diagram to tell which wires are what . The pedal position sensor isn't

...all.. I replaced the throttle body but still nothing. Does anyone know what this could be? Im desperate!! This could be a issue with the accelerator pedal position sensors or brake pedal input ...

...brake pedal position sensor connector and harness. The following parts were installed by the dealer for my 2010 Malibu: 11509086 - SL-N-Strap (08965-BOPCKT) 13596990 - SL-N-Clip (02559-C) 13596991 - ...

...of the accelerator pedal. When braking during VSES activation, the pedal pulsations feel different than the ABS pedal pulsations. The brake pedal pulsates at a higher frequency during VSES

...brake pedal at the same time and hold them. Wait until the wrench light goes away and then you can release the pedals. As for the throttle sensor the only advice I can give you is that to find out if ...

...pedal sensor and then commands a motor on the engine throttle valve to open the throttle to the desired power setting which it reads through yet another position sensor at the throttle valve on the ...

...brake pedal.I did not see any service bulletins.When you start the vehicle the motor builds vacuum so you don`t have to add pressure.These are vacuum leaks not pressure leaks.You could try having the ...

Sensor Indicator - Inflatable Restraint, Front Passenger/Child Presence Detector AL2 Control - Seat, Power Lumbar AM0 Seat Rear - Flexible Configuration AQ9 Seat - Front Bucket, Luxury AS6 Restraint -