...rear wheel bearing nut on a 2003 Renault Traffic Van DCi 100 if it is a solid bearing do it up as tight as you can.if it is a tapered bearing do it up untill the nut is touching the bearing check the ...
...Rear hub and bearing Click to Enlarge To install: Install or connect the following: New wheel bearing into the steering knuckle Snapring to the knuckle Wheel hub Steering knuckle cam and hand tighten ...
rear seal and grease the bearings by packing them. Now reassemble. Tighten the but down about 40 ft lb. Turn the rotor forward and backward now loosen the nut and turn it again. now tighten it back up
...rear wheel mounting broken off. How are they repleced? First you will have to pound the broken lug studs out of the wheel hub, then you will need a lug nut and about a half an inch thick of flat ...
rear wheel stud. 2003 dodge caravan Should be a pressed in wheel stud, remove hub and have old one pressed out or you can do it the primitive way, by double nutting the old stud and striking it with a
...rear wheel studs that are broken. The wheel hub flange won't come off. Is there a special puller for this, do I need to apply more force or is there another method for removal? You do not remove the ...
...rear axle and check if the backside of the rims are clean, no rust etc.. clean up the the wheel hub, so the rim sits total close to it. Tighten the wheel nuts with 140 to 150 N/m. If your car start ...
Question about Cars & Trucks
rear brakes. i replaced the shoes but on reassembley when i tighten the hub nut on the end of the axle the wheels lock up. Any suggestions? I think the drum is going in tight on the wheel bearings. It
rear wheel bearing replacement Often the front wheel hub bearing assembly for driven and nondriven wheels is actually two tapered bearings facing each other. Exploded view of a typical front wheel ...
899 questions posted
Usually answered in minutes!
689 Questions
627 Questions
646 Questions
540 Questions
383 Questions