1984 Honda Accord "problems removing lower ball joint" Questions

...removing the dust cap from the arm connected to the hub assembly. The inside is all rusted and appears as though it may need to be removed with a die grinder. Thanks in advance. Leaving the nut loose ...

...need is a ball joint fork to seperate the upper and lower ball joints. You have to remove the whole steering knuckle assembly to get to the bolts in back of the rotor and hub assembly. hope this ...

...Lower Ball Joint Replacement NHTSA99V069000 04/20/1999Recall 98V231000: Air Conditioner Wire Harness Chafing NHTSA98V231000 09/18/1998Campaign - Front Balancer Shaft Oil Seal Replacement 00-073 ...

...lower ball joint, trooper problem: do u have the ball joint press?The ball joint is presse3d out; the problem is getting it to clear the knuckle, as the CV joint is in the way the upper or lower ball ...

...removing the bottom ball joints on 2003 chevy trail blazer need step by step please. remove steering knuckle with wheel hub and bearing attached ,remove lower ball joint flange with a chisel,remove ...

...lower ball joint on a 2002 Chevy Malibu I list a lower ball joint available to purchase. So you would have to disconnect the lower control arm from the spindle to replace the joint. First of all . ...

...removing the lower ball joint on my 1999 dodge ram 1500 4x4 You can got to a parts store and they will loan you a ball joint tool, all it is is a wedge type fork, that you beat the heck out of to pop ...

...lower ball joint?...any special tools or tricky removal or access issues?....thanks alot folks....B The ball joints are part of the lower control arm . The control arm is not extremely difficult, but ...

...removing lower ball joints on an 01 expedition with air bags. If rust is problem in your area I would suggest (if you have the strength) to remove the knuckle with the rotor still on the hub assembly ...

...problems before this? The ball joints may not have been properly lubed during preventative maintenance. The rubber boots may have developed a leak, depleting the grease needed for the joint. In any ...