1984 Honda Accord "dangerous power steering goes driving" Questions

power from the motor that the car dies. Is this the brake booster or what I replaced the calipers and master cylinder already. Hi............ On your problem with the HONDA.. You are right the Problem

power steering, could the fuse be the problem?  This is very dangerous and with a kindergartner, I need to have the problem fixed. There are sensors in the steering column. they are going bad and

...dangerous to continue driving. this sound comes and goes and is normally when i have turned a corner and start going straight thanks for any help liz make sure your power steering fluid is ok this is ...

...power steering fluid and it was missing a little bit. After adding some to the appropriate level, nothing changed. No evidence of any leaks anywhere either. I still have the same problem though. Not ...

...power steering) EXACTLY like AIR-BRAKES... (Compressor fail)... The BRAKES get applied...!! >> AS designed...!! << You CANNOT let your HYDRAULIC systems fail... You cannot even steer your ...

...dangerous situation you're in. The main thing now is safety so I would disable the air bag 'till you get to a mechanic. Disconnect the battery overnight to discharge power to it then take (usually) 2 ...

...DANGEROUS do not use them for this) Put the car in drive. Tap the brakes several times to see if you still hear it. leave the wheel in the forward position. If not drive up to 40 and turn the wheel. ...

power steering leak that is all over engine and passenger side off car n tires, I have a couple sparks that spark up that I can see at night n hear during he day it's by the power steering reservoir n

Dangerous on road shutdowns. I have a 1996 Grand Cherokee, aprox 125,000 miles. It has shut down completely while driving 65+ mph on the freeway. No lights, no power brakes, no power steering. Then I ...

...Power steering. It is possible for the Pulley tensioner to have a weak spring or you may have a stretched Serpetine belt. This condition would cause the belt to skip under a load. If the belt is ...