1991 Jeep Wrangler "slave cylinder" Questions

Ad

Question about Jeep Wrangler

2 Answers

slave cylinder leaks clutch slave cylinder leaks what does it consist of to change it Remove the bolts holding the slave cylinder to the transmission. Disconnect the hydraulic hose. Reconnect ...

Ad

...slave cylinder while you press the pedal is should "squelch" if there is air in there, if the slave cylinder doesn't make a squelching sound then the master cylinder or a hydraulic line between the ...

Ad

...slave cylinder YES U DO THE SLAVE CYLINDER IS ATTACHED TO THE CLUTCH RELEASE BEARING. no but you may want to bleed it before you reinstall it the 1990 4.2L has an internal slave cylinder with ...

slave cylinder but i continue to have problems after my jeep sets for awhile, the transmission will not go into gear, if i pump the pedal about 30 times it will shift great while i'm driving..........

Question about Jeep Wrangler

1 Answer

...slave cylinder but just not sure if I am loosening the right part. Can't find any pictures. There is only one bleeder valve on the clutch slave cylinder so you can't be loosening the wrong ...

Question about Jeep Wrangler

1 Answer

...slave cylinder on tt quattro clutch was traveling half way up and became freer the more u drove it, but now its practically an inch from the floor. Ive read this could be master cylinder and the ...

slave cylinder does this mount to the pass side on out side of clutch housing? have tube sticking looks like it mounts there , but looked slave cylinder on jeep site looks like something that would be

Question about Jeep Wrangler

1 Answer

slave cylinder, now grinds My clutch pedle suddenly went to the floor. I was told to replace my slave cylinder, after several problems, I finally got it in, and it didn't pop out... Now the problem is

Question about Jeep Wrangler

1 Answer

...slave cylinder came apart. the push rod came right out of the cylinder. does this mean my clutch is warn causing the rod to exceed out of the cylinder? Hello, the answer is not necessarily, you have ...

Question about Jeep Wrangler

1 Answer

slave cylinder check it for leaks or if an external slave cylinder check it for leaks. Check the back side of the master cylinder where it attaches to the firewall and see if the seals are leaking. If

Not finding what you are looking for?
1991 Jeep Wrangler Logo

481 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...