...do you guys think? 1. 40psi 2. 0psi 3. 65psi 4. 55psi 0 psi and you have to ask? There is something terribly wrong in the second cylinder, you will have to at least remove the head to find out
Question about Jeep Wrangler
...cylinder to booster (Fig. 3). (2) Remove instrument panel lower trim cover. (3) Remove retaining clip attaching booster push rod to brake pedal (Fig. 4). (4) Remove bolts/nuts attaching booster to ...
4 cylinder jeep Yj How to remove/install a 4 cylinder jeep Yj clutch? If you need to ask, you have never done one. I suggest that you get a chiltons or haynes manual to guide you through it. tips are:
Question about Jeep Wrangler
4 cylinders are not firing spark good fuel good what do I check next really depending on how far you want to go as you will need a vrs kit that will be over a hundred and then it all depends on damage
cylinder block and timing case cover (2006 vehicles). Position the oil pan. Install the 1/4 inch oil pan bolts. Tighten to 84 in-lb (9.5 Nm). Install the 5/16 inch oil pan bolts. Tighten to 132 in-lb
...4 cylinder 1997 without AC. So I had the belt off, and last thing was to put it back. A. If you are unsure about memorizing the belt path, make your own drawing. If you are absolutely sure you can ...
...cylinder head bolt to the specified torque. (torque spec is Cold Engine 105-115 Nm (76-83 ft lb) ) 4. Install the timing belt tensioner pulley. 5. Install the timing belt on the camshaft sprocket, ...
Question about Mercury Cars & Trucks
4. Remove camshafts. 5. Remove valve tappets from cylinder head, then support front of engine with wood block between crankshaft pulley and front subframe. 6. Remove righthand engine lifting eye bolt,
...4 cylinder car 1. Spark plugs removal 1.1. Front cylinder bank spark plugs removal: 1.1.1. Disconnect the battery from car terminals. 1.1.2. Remove the engine plastic cover. 1.1.3. Disconnect the ...
...cylinder head bolts on a 93 ford escort gt Hi A cylinder head removal tool is provided for removing the cylinder head from the engine block of an engine.The tool comprises an elongated bar made of ...
481 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions