2001 Chrysler Town & Country "high idle problems" Questions

...high. It is actually loping. It runs fine while on the road but when you stop at a light it will idle up and down. It sounds like there could be a problem with the idle air control valve, but if the ...

...idle air control valve can't open to desired position before engine rpm raises to high. Caused by vacuum leak. Which computer shows up as running lean or not enough fuel, when in reality its getting ...

...high idle. At higher speeds it sounds like lower end. Everything appears ok in the upper end. No metal in the pan. Have already replaced the timing chain. Any ideas? if it sounds like a toy train its ...

...idle RPM down a bit. Your blower motor is bad or the wiring has deteriated to the point of causing a high current draw. A good auto tech (or knowledgeable friend with a DVOM and amp gauge) can ...

...high, your idle speed could be too low, the belt could be too loose, or the alternator needs a new regulator or the alternator needs to be replaced. Also check your battery terminal connections for ...

...idle. Check for exhaust leaks between engine and 1/1 HO2S. Repair exhaust system as necessary. If exhaust system is okay, go to next step. Check exhaust for excessive smoke caused by coolant entering ...

...high idle (at least 1000 RPM) the voltage should be at least 13.4 to about 14.2 Volts DC. This is also most likely the cause of the light that is on that you say looks like a pump due to the low ...

...High" I can sympathize. Make sure you have documented with the dealer that you have made several efforts to resolve the problem while hopefully, still under warranty. The main computer sometimes has ...

...high of gear,Does not do this at all times.Also does this in reverse at times.While idling in Neutral all is good,while in Drive a slight "chirping"sound comes from the driver side of trans,(appears ...

...High Idle Problem http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html ------- While stop engine idles like cylinder missing? ...