...pedal stroke should be: 5.1 - 5.5 in clutch pedal height should be: 7.76 in if adjusting the clutch doesn't help with the transmission feeling notchy, may be the syncros. TORQUE DE ...
...height and stroke at the clutch pedal. ...
...PEDAL HEIGHT The clutch pedal height should not be a periodic adjustment but may be checked after components of the mechanical clutch system have been replaced. The proper clutch pedal height should ...
...cluster. Losen the locknut on clutch master cyl. pushrod and turn pushrod in or out to get specified stroke and height at clutch pedal. The pedal stroke should be 5.6" and the height should be
Height of Clutch Pedal How does one adjust the height of the clutch pedal on a 1987 Suzuki Samurai? As in how far the pedal has to be released to engage. I assume it is a cable operated clutch. If so ...
adjust clutch pedal is there a way to adjust my clutch pedal height on my rover 25 car it should be the same height as the other pedals
Question about Honda Civic
...pedal height, or is it going to require a new clutch? Toyota says pedal height should be approx. 5.5", mine is only 4 5/8". However, the threaded stud for adjusting free play only has approx. 1/4" ...
...pedal height and free-play adjustment that needs to be correct. Freeplay distance is 3/16 to 5/8 inch, adjusted at the pedal end of clutch pushrod. I don't know the pedal height for your ...
pedal height by turning the clutch master cylinder pushrod which is attached to the clutch pedal under the dash. Loosen the locknut and turn the rod to raise or lower the clutch pedal. Don't forget to
...pedal point? most cars have 2 adjustments on just the pedal. the height. and then the free play to the back side of the MC the FSM covers every step of this, did you try to read that ...
998 questions posted
Usually answered in minutes!
1,130 Questions
1,041 Questions
758 Questions
811 Questions
722 Questions