2002 Cadillac Deville "electric motor turn unless helped" Questions

...turn the key and makes a cliking sound like if its a dead battery,, but i change the battery and still wont cranks unless jumped, or given a boost with another car..i guess needs extra juice.. im ...

unless you switch the wires at the motor. I need to know what device switches the polarity on the motor wires when the headlite switch is turned off. I tried a new headlite switch & that did not help.

...electric shift motor. You can remove it and turn the shift shaft with a cresent wrench to move it to 4 high or 2 high. Caution: be sure to block the wheels so the vehicle can not move before you get ...

turn the stearing wheel and play the shifter Yes if the mount is not on the correct way it will cause problems like that and even kill the motor while driving down the road. When the van was made thay

...electric shift motor on my 1993 ford ranger extra cab works until you turn it off but then if you try to engage it again, it wont unless you wait a few hours and then it'll do it again. I was on here ...

...motor, wipers, and turn signals shut off as soon as headligh swich is turned on. These will not work again until ignition switch is turned off and back on several times, and only if headlight switch ...

turn right how do I fix it Test the electrical circuits for the blower motor . Look at a wiring diagram and find any connectors or ground connections an see if any are loose .Free wiring diagrams here

...unless someone has better advice... The starter location is as follows:--- The starter is an electrical motor that provides a jolt of energy to ignite sparks needed to crank an engine. First unplug ...

...Electric Testing Techniques You Need to Know Blower Motor Problems Auto Repair Help Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model , engine ! ...

...turn the car off sounds like a wiper relay its stuck on or the switch its self is faulty hope this helps ivan try adding a ground wire, just take a wire and rub it on the motor ad the other end to ...