1989 Cadillac Sedan DeVille "89 problems" Questions

Ad

I have an 89 Cadillac Deville, and the front passenger window won't go up or down properly. The motor is working but that's it. What's the problem and what do I need to fix it? Sounds as though you ...

Ad

Where is the ESD relay located on a 1989 Cadillac Sedan Deville? Hi , what problem are you having ? There is no such relay on a 89 Cadillac ! Could you possibly mean a ASD relay - auto shut down relay

Ad

Question about Cadillac DeVille

1 Answer

i have a 89 cadi dev, today the heater motor would not turn of when i turned the car off. So my battery ran down. How can i find the problem? HVAC blower resister located on firewall in top of plastic

Question about Cadillac DeVille

2 Answers

...89 cad. deville , I changed the BCM and since then no problems and everything works great now for over a year you might need to have your BCM(body control module) tested.If it is faulty it will ...

Question about Cadillac DeVille

1 Answer

89 4.5 deville no start problem Car started well allowed 5 min to warm up, went to drive away car died, attempted to start no luck just turns over. Checked fuel pressure found it to be 12 psi., It ...

Question about Cadillac DeVille

1 Answer

...unit. Looks more like a black plastic block much like a relay unit. Not sure where it is in your '89 Caddy. So research that and replace it when you find it. Also, It's probably not a bulb problem ...

89 cadillac sedan deville not blowing heat !! i just posted this question and someone told me to change the thermostat? what does that mean? take it ou and put a new thermostat in?? Yes, that would ...

...problems when the job is done. Pay special attention to the pre-installation steps for the Intake Manifold. To Replace the Starter, Remove or disconnect the following: Negative battery cable Intake ...

Question about Cadillac DeVille

1 Answer

89 cadi eldorado. passenger side front brakes keep going bad after a week of driving. new pads, rotor. and caliper. any thoughts? Your problem is most likely the rubber flex hose going to the caliper.

Question about Cadillac DeVille

1 Answer

...Install the crankshaft sensor and the retaining bolt. Tighten the retaining bolt between 10 Nm (89 inch lbs.). Connect the crankshaft position sensor electrical connector. Install the oil filter ...

Not finding what you are looking for?
Cars & Trucks Logo

422 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...