1997 Acura CL "drive cycle readiness catalyst" Questions

drive cycle to clear all monitors to "ready".The vehicle may take multiple "from cold" drive cycles and hundreds of miles to clear all.Drive normally with varied driving and include long coasting down

...drive cycle) then monitors will have completed and be "ready" unless there is a problem in which a DTC will be stored along with freeze frame data (Mode 6) and if enough key cycles for the individual ...

Catalyst not ready rear 02 sensor defective or (s2 bank one or two ) drive cycle has not reset the monitor yet,, Catalyst is the longest to reset usually

...What should I do? Drive it some more. Has the battery been disconnected/replaced recently? The Inspection station should be able to print you out a drive cycle to get the monitors ready

...drive cycle and attempt to replicate it but its usually very difficult drive exactly as the cycle asks. Good luck. Are they not set, or failing? If they are not set your inspection station should be ...

...drive cycle to complete all monitors cycling, some vehicles complete cycle in 10 miles, where as some could take 100 miles or more.
My Toyota EVAP readiness state will not cycle in cold weather ...

...drive cycle for an 01 pontiac aztec? The monitors were reset due to the battery being disconnected on my 01 Aztec, and I have been driving it for a week.(approx. 700 miles). There are three monitors ...

Drive Cycle instructions for 2002 PT Cruiser? Failed emissions test due to monitors not ready - catalyst, oxygen sensor, heated oxygen sensor, egr system Buy a cheap code reader and always scan your ...

...drive it. I am betting you have recently "cleared" codes which also clears readiness monitors in an attempt to better control people cheating the system. After enough drive cycles are reached the ...

...drive cycle and there is no way you can do one in the city or anywhere. The self diagnostics will eventually see what it wants and turn itself to read ready. Be patient. Bob The monitors may take ...