...the camshafts are turning. i have included a diagram of the belt setup check the belt and get back with me, if it is the belt you will neeed to put the engine back into valve timing....talk to you ...
...back on I need a diagram for putting serpentine belt back on 2004 dodge durango 4wd 4.7L there should be a decal near the hood latch or under the front lip of the hood with the belt routing
...Remove the belt. Follow the routing diagram, put the wrench back on the tensioner pulley apply pressure to get the belt back on. (to give you enough room to get the belt back on all of the
diagram on vehicle and not sure where tension can be released to put belt back on. http://www.2carpros.com/diagrams/pontiac/sunfire/2002Here ya go. The tensioner pulley should have a square hole (1/2"
...diagram i have more than one belt with ac and power steering in an 81 ford need diagram and order of belts for the 350m motor need assistance in how to put mserpentine belt back on chrysler 300c ...
diagram of how to put belt back on can you show me a diagram of how to put a belt back on the 2004 ford freestar i took it of and now i cant get it back on Hope this will help.
fan belt fell off need a diagram to put it back Fan belt fell off need a diagram to put it back on. assuming you have the 3.3 engine
...belt back on i have a 2000 volvo s80 t6 and am looking for a diagram to ehlp put the serpentine belt back on If you purchase a goodyear replacement belt the diagram is on the back of the ...
...diagram & instructions on how to put belt back on. Also, does nut need to be put back on pulley w/torc,compressor or manually. Is there suposed to be a lock washer holding nut on? Nut came off of ...
...belt and gears you put the bolt for the crank pulley back in the crack shaft and turn the motor over manually with a ratchet and socket about 5 times until the marks on the cam or cams line up with ...
354 questions posted
Usually answered in minutes!
283 Questions
188 Questions
147 Questions
113 Questions
91 Questions