1995 Acura Integra Coupe "crank wont start" Questions

...installed parts off another 95 integra & my car will crank but wont start!idk what im missing!any help is appreciated... Hi Is it a coded key that your using ? If so it might need recoding Regards ...

...wont start but cranks over.checked timing on cams and ok there. Change crank senser did you try the distributor I just had the same problem with my acura and I changed the sensor and it did not

...Hatchback wont start. It turns over but wont crank. Thre is no spark from the spark plugs. Replaced the distruibetor and spark plugs, plus wires. Now still wont fire just cranks Duh, check the

...wont start and yesterday it would...i change the distributor like i was told cuz they said it wasnt getting no spark n that was the problem so i did n it still only cranks it wont start idk what the ...

...wont start it turns over but wont fire i changed the distributor,and spark plugs,i am getting fuel but it just cranks and cranks but wont start,the cause i dont know was driving down road and it just ...

...checked the fuel pump, all fuses are good, battery good just wont fire check to mae sure its not an immobilser.check crank sensor if applicable or electronic distrubtor. check main ignition relay

...going. If the batry is not the prob you can check your plug cables as well as your coil or coil packs. Some cars has a pickup on the crank pulley or on the flywheel. If its faulty it also wont

...wont start it turns over but wont fire i changed the distributor,and spark plugs,i am getting fuel but it just cranks and cranks but wont start,the cause i dont know was driving down road and it just ...

...wont start I have spark and is getting fuel. replaced wires and plugs and put in a new crankcase seal. it turns over and sounds lie it wants to start but nevers completely starts crank sensor not ...

...wont start after changing fuel filter i changed my fuel filter and my car wont start. is there a air lock or something that couldve happened? If this is an inline filter with the same inlet/outlet ...