rocker arm toruge specs, how many lbs? FOR THE 242 -4.0 ENGINE ROCKER ARM TORQUE IS 21 FT LBS FOR THE 5.2L AND 5.9L ENGINES ROCKER ARM TORQUE IS 21 FT LBS. when i tighten the rockers down the engine ...
...rocker arm. Replace any that are scuffed, pitted, cracked or excessively worn. Inspect the valve stem tip contact surface of each rocker arm and replace any rocker arm that is deeply pitted. Inspect ...
whats the torque spec on a 98 cherokee for the rocker arm bolts on a 4 liter straight 6 19 ft lbs.
...specs? 1994 5.2l grand cherokee 4x4. need to know how tight to torque them. I think you mean the rocker arms. 21 Ft/Lbs. If your talking about the "yoke retainers" then they get torqued to 200 INCH ...
rocker arm assembly on the jeep and the lifters are not adjustable in the event you can adjust them pull the valve cover using a ratchet and short ext. with the engine to operating temp at normal idle
...in straight 6 engine. any secrets? No, it's fairly easy, just remove the valve cover, unbolt the rocker arms, remove pushrods. Make sure you have correct parts and compare length of new ones to
...rocker arm 3.400 rocker arm torque specs Here is a suggested updated torque spec for this engine's rocker arm bolts; Rocker arms Step one: Torque to 11 ft lbs then tighten an additional 90 degrees of ...
Question about Jeep Grand Cherokee
...rocker arm torque specs on a 1996 dodge caravan 3.0 liter rocker arm torque specs Hi Derrel,here's a link to a Autozone repair guide on your rocker arms,you can join their site like me for free and ...
rocker arm specs for 22RE engine Here's a link on your rocker arm specs. Repair Guides Engine Mechanical Rocker Arms AutoZone com
...rocker arm torque specs. thanks Hi,do you have any 1997 malibu 3.1 intake and rocker arm torque specs. thanks. joe www.synthetic-distribution.com on 3.1 v6 it is--rocker arm bolts--- 89 in-lbs,intake ...
2,884 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions