1992 Audi 100 "thread shred" Questions

...its serpentine belt. I got a new one from Napa which is too long no matter how I attempt to thread it. (It's 2273 mm long.) It appears that an idler pulley is missing... There's only one ...

1999 Ford ZX2 Sport 2.0l DOHC non-turbo (manufactured 4/99, 152,000 miles), serpentine drive belt went yesterday, shredded, tried to limp home, but car died (still had enough electrical power to drive

rear end makes a shearing noise Well,I worked on a Silverado rear end once.........wasn't made very well,I'm afraid.Have you checked the U-joints first?  The thing I found on this ...

Derrick Schultz issue - where in the world does he live? Idle issue, no codes, clean Egr 2004 3.0 V6 Accord 2004 3.0 V6 Accord,died,Egr code, misfire cyl 6, cleaned Egr,now closes.Cyl 6 spark plug was

Removing Chewed screw from Freelander Brake disc Hi, I am in the process of changing my brake discs, first attempt! I have manged to chew up one of the 2 screws that holds the disc in place, does ...

serpentine belt tore while driving bmw e38 hi the belt tore when i was driving my car home and the ac belt fell off when i stopped the car i found that the v belt is shredded into pieces what could be

...then touch the screw driver shaft to the + CABLE CLIP (not the terminal because you can damage the threads if it arcs) Be sure to have a good grip on the starter because if it works then it will

...then touch the screw driver shaft to the + CABLE CLIP (not the terminal because you can damage the threads if it arcs) Be sure to have a good grip on the starter because if it works then it will

...have included inspection of the serpentine belt about a month before the initial post in this thread. I cannot say what if anything was missed as I do not know what actually failed. In response ...

My question is related to the previous thread. However id like to reitterate the problem so that whoever stumbles upon this thread on google could help them immensely. I bought my mitsubishi montero ...