1999 Lexus LX470 "install steering wheel ignition 2000" Questions

Ad

...install into new SCLA. If your mechanically incline this should take about 2-3 hrs. and save you $300-400 in labor cost. Part numbers are same at Toyota and Lexus dealers. Steering Column Lock Assy: ...

Ad

...steering locks when rotating the wheel and then with a little tug will allow another rotation. Did I install the key cylinder incorrectly into the SCLA where it will not allow the locking mechinisum ...

Ad

...steering wheel to access the screws. You'll see that the SCLA is secured by 2 break-away bolt (this is an anti-theft feature). Use a dremel tool with cutting disc to make a notch in the screw head to ...

install ignition switch in 2000 jeep wrangler with auto trans do you need special tools, Do you have to takke the steering wheel off. You need the special Torx Driver with a center divet to remove the

...steering column.If you buy a new ignition switch, on purchase the switch with keys. Don't buy the hole new ignition housing.. If you do it will get expensive.In the ignition (old) housing drive ...

...steering wheel if it interferes with the access to the steering column covers on your vehicle. Remove the steering column covers. 3. Unplug the wires from the ignition switch, remove bolts and lift ...

Question about Lexus LX 470

1 Answer

steering column. Disconnect the ignition key reminder switch electrical connector. If necessary, remove the ignition key reminder switch. Installation NOTE: Use new ignition switch lock cylinder bolts

steering column shrouds. 3. disengage wire harness straps and remove wire harness. 4. disconnect 2 multifunction switch harness connectors from bulkhead connectors. 5. on grand prix slide pass key off

...steering column shroud. unsnap and slide gearshift lever boot up toward end of gearshift lever. NOTE: ALWAYS INSTALL NEW GEARSHIFT LEVER RETAINING PIN DURING REASSEMBLY 3. remove gearshift lever ...

...STEERING COLUMN COVERS.DISCONNECT THE IGNTION SWITCH ELECTRICAL CONNECTORS.REMOVE THE SWITCH RETAINING SCREWS THEN PULL THE SWITCH FROM THE LOCK CYLINDER HOUSING.IF YOU TRYING TO REMOVE THE LOCK ...

Not finding what you are looking for?
1999 Lexus LX470 Logo

99 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...