1990 Lexus LS 400 "transmission light blinking" Questions

My 1990 Lexus LS 400 has the O/D OFF lights blinking. Seems it skips second gear. What causes it and what is the solution need to have the car scanned but posible internl problem on the transmission

...light is blinking it means that the transmission isn't capable of, or being allowed to, shift into overdrive. I would have a transmission shop check this one out as soon as possible to see what is ...

...light in dash. Checked the transmission fluid, its OK. Not sure what to look at next...? I had the same problem took it to the dealer and it was a sensor inside the transmission. it more and likely ...

not wanting to shift gears Have the vehicle scanned.The overdrive light is like the check engine light for the transmission. There are transmission codes in the ecm if the overdrive light is blinking

...light still remains on, you may be facing serious transmission problems. Many have found this blinking light was the first indication of said problems on the way. However, mine has been blinking for ...

...transmission light keeps blinking When this light blinks it indicates a problem exists with the electronically controlled transmission, have it scanned for the fault code that is store in the control ...

...light is blinking the transmission computer put the transmission into limp home mode so it will not shift normally and you should try not to drive it very far when it gets to this stage you need to ...

transmission light blinks the transcheck light blinks after shifting to drive Check the transmission fluid level,transmission fluid condition,Use a scanner to find the code given by this fault.

...transmission. if the s light is blinking it nomally is to tell you a transmission problem but it should stay on not blink are u useing a lot of fluild or maybe check wiring frist and look for any ...

...light is blinking Transmission will not go into first gear to second gear without stalling the D5 gear started blinking when the light blinks for OD (5th) gear it means that a fault exists in the ...