2005 Lexus ES330 "hold stays dash" Questions

Ad

Question about Lexus ES 330

3 Answers

...B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to "On". 5. Hold the odometer button in until the MAINT ...

Ad

Question about Lexus ES 330

2 Answers

...Hold on your dash is telling you that (active trac) is on. There should be a botton on your dash listed A/T MODE just push it and the HOLD should go off. i have the same suv. there is a light that ...

Ad

Hold light stays on, 2002 kia sportage "hold" light on dash stays on. How do I turn it off and what does it mean? Thanks are u sure the button isn't pushed on the side of shifter...If its flashing i ...

...hold the key in on position engine stays running,but the starter is still ingaged. Check the ignition switch for proper adjustment and operation. Switch is above the column (attached to it) under the ...

Question about Lexus ES 330

1 Answer

...hold it. Low beams do not work and daytime running light dash indicator stays on all the time. Is it a relay or switch? How do I solve this issue? 1998 Sunfire if you have to hold the switch so the ...

...dash board lights dimmed then shut off. My car will only stay on if I hold the key in the on position. I have a 5speed. As soon as I let go of the key it shuts off. It will stay on only if I hold the ...

Question about Lexus ES 330

2 Answers

...attached. push switch in and twist to remove. then pull the button as far out as it will go. while holding brake pedal down reinstall switch. then pull pedal up to top. this will reset the brake ...

2001 dodge intrepid High beam lights wont stay on unless you hold the handle bright lights wont stay on HEloo , It indicates problem with handle, replce the combinationin switch (Headlight handle) it ...

...stays on. If I try and turn my bright lights on they won;t stay on unless you hold them. If you hold the bright light switch the blower works and the brake light goes on. All other lights work with ...

...stays lite. What does this mean? There is a pressure sensing switch on the master cylinder that will turn on this indicator light on the dash if there is enough of a pressure difference between the ...

Not finding what you are looking for?
Cars & Trucks Logo

195 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...