...reverse light fuse was blown. replaced and blew again. What could cause this fuse to continually need replaced hi check the wire because if the fuse keep blowing there's a wire somewhere on the car ...
Question about Ford Cars & Trucks
...sport track You have to isolate the wiring harness that goes to the reverse light. Somewhere in that path a chafed or bare wire is grounding out and blowing your fuse when you put the car in
Question about Cars & Trucks
...reverse light wiring. You have one power wire to the neutral switch. So when the lights are supposed to come on the fuse blows the turn signal . You said you check the wiring, Did you check for ...
reverse light fuse blows when put into reverse Unfortunately, many possibilities. If you have time, start by removing both reverse lamp sockets from light assembly(and keep from touching any metal), ...
Question about Nissan Cars & Trucks
...light bulbs I noticed that the backup lights where hooked to the taillights is this normal!? no reverse lights get power from a reversing switch and hove a separate circuit check for correct bulbs in ...
Question about Lexus GS 400
...they are two totally different circuits check for a damaged wire at the reverse light switch or bulb holder for the reversing bulbs for a dead short as for the rest check the IGN fuse under the ...
...THE REVERSE LIGHT FUSE.CAN ANY ONE HELP,,THANKYOU id say you have a chaffed wire in your harness somewhere if you dont engage reverse at all while driving. check your wiring harness with an amp
Question about Lexus GS 400
...fuse for backup lights on truck just going by reverse going to dr it blows Loose wire or microswitch that is shorting to ground. It should be somewhere near the shift lever base pivot area and ...
...any other affected circuit ? The reverse light switch may be faulty seen as you have to pass thru Reverse to select a drive . Wiring can be damaged if off road conditions are extreme... Hope this ...
211 questions posted
Usually answered in minutes!