1998 Lexus Gs 300 "accelerator pedal position sensor" Questions

...accelerator position sensor malfunction. In a posting here he had same problem and it was the throttle control motor. You can hear the throttle control motor clicking when its working, then suddenly ...

Accelerator Pedal Sensor is on the Back-side of the throttle body where the throttle cable connects to, and has a spring on it. It was fine. GS300's are indeed "drive by wire" concerning the throttle.

...accelerator pedal position sensor connector, the throttle body bracket and the throttle body. Then remove the spark plug cables and the ignition coils. You will then crack the spark plugs loose 1/4 ...

accelerator pedal position sensor and the circuit.P2138    NISSAN Description The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly

...Accelerator Pedal Position (APP) Sensors. Here are a few codes that could set . DTC P2120: Accelerator Pedal Position (APP) Sensor 1 Circuit DTC P2122: Accelerator Pedal Position (APP) Sensor 1 ...

Accelerator Pedal Position (APP) Sensor 1 Circuit DTC P2122: Accelerator Pedal Position (APP) Sensor 1 Circuit Low Voltage DTC P2123: Accelerator Pedal Position (APP) Sensor 1 Circuit High Voltage DTC

Accelerator Pedal Position (APP) Sensor 1 Circuit DTC P2122: Accelerator Pedal Position (APP) Sensor 1 Circuit Low Voltage DTC P2123: Accelerator Pedal Position (APP) Sensor 1 Circuit High Voltage DTC

Accelerator Pedal Position (APP) Sensor 1-2 Correlation Electronic throttle control problem . The throttle actuator control (TAC) system delivers improved throttle response and greater reliability and

...Accelerator Pedal Position Sensor Description & Operation A power supply is applied on the Accelerator Pedal Position (APP) Sensor (main) power terminal from the PCM. The ground terminal is ...

...pedal. The accelerator pedal opening value is converted to a signal in APP sensors A and B and transmitted to the engine control module (ECM)/powertrain control module (PCM) to compute the target ...