Question about Suzuki Esteem
...valve adjustment a part of normal maitenance on Suzuki Esteem It's a 2000 Suzuki Esteem with the 1.8 liter engine. It has 137000 miles but I only bought it 6000 miles ago. I'm wondering if these ...
engine noise My 1995 esteem develops a lot of tappet noise both during running and idling conditions. It in fact sounds like a diesel engine. Accelerator is not sensitive, i mean i don get smooth ...
can change to unflatand the cluch can drag. engine oil getting into the clutch though a leak in the valve cover or rear main can get on the cluch and make it drag and grab
Question about Ford Cars & Trucks
Valve clearances for a 2.5 turbo diesel ford courier Pe 2000. intake 0.20mm exaust 0.38mm adjusted with engine cold. with 1 and 6 fully open - adjust valves 4 [inlet] and 7 [exhaust] valves 2 and 3 ...
...valve rocker arm adjustment diagram. first get engine in number 1 firing position, adjust exhaust valves 1 - 3 - 4 - 8 adjust intake valves 1 - 2 - 5 -7 now turn engine another ...
...Valve Lash ADJUSTMENT 1.6L Engines NOTE: Measure valve clearance with the engine cold. Before servicing the vehicle, refer to the precautions in the beginning of this section. Remove the valve cover. ...
Question about Cars & Trucks
08 Civic EX, valves became noisy at60K, valves quiet after warmup. They will probably still be noisy after I adjust them. Would the cause be excessive wear on the valves stem ends and rockers? If ...
Adjustment is possible at idle but it is best to use valve clips to keep the oil from squirting all over the place. After cranking the engine over by hand, where 1/4 turn after the Intake valve closes
Question about Suzuki Esteem
when the valves are adjusted on the de-compression stroke can they be re-adjusted or is the head now faulty? The valves were adjusted on the decompression, stroke can the be re-adjusted to the right ...
...valve clearance: If the clearance is not within the specified range, adjust the clearance by loosening the lock nut on the rocker arm and turning the adjustment screw. Tighten the lock nut when the ...
226 questions posted
Usually answered in minutes!
120 Questions
120 Questions
128 Questions
56 Questions
50 Questions