2003 Mercury Mountaineer "remove replace rear brakes" Questions

Ad

...replace rear axel wheel bearings on 97 ford explored what special tools are needed for this job You will need an internal bearing puller. You will have to remove the rear axle by pulling off the ...

Ad

Question about Mercury Mountaineer

2 Answers

remove the driveshaft from the transfer case to the front differential case. Takes maybe 15-20 minutes and there are no leakage issues by doing so. The vehicle will now be a rear-wheel only drive one.

Ad

Question about Mercury Mountaineer

1 Answer

...rear wheels to keep it from rolling. 2. Disconnect the negative cable from the battery to remove voltage from the system. Don't want to arc yourself to the frame when you disconnect the cables from ...

...remove the drive shaft from the transmission [or transfer case if you have a 4WD model]. Be sure to place a catch pan under this area, as fluid will leak out once the nose of the drive shaft is ...

Question about Mercury Mountaineer

2 Answers

...replace the brake light bulb, and dont know how to..can someone tell me how Please don't forget to rate....thanks! Exploded view of the rear light assembly used on the Explorer/Mountaineer models The ...

Question about Mercury Mountaineer

3 Answers

...replace these parts is no where near 6000. For half of that, the complete, transmission can be replaced. Also note, There was a maintenance recall in 2004 for 2002-2004 models...Ford released a ...

Question about Mercury Mountaineer

1 Answer

...Remove the rear disc brake caliper (2552). For additional information, refer to Caliper in this section. Disconnect the brake hose. Remove bolt. Disconnect the rear wheel brake hose (2A442). Remove ...

Question about Mercury Mountaineer

1 Answer

replace the rear axle bearing REAR WHEEL BEARING/ HUB Removal Procedure Raise the vehicle. Refer to Vehicle Lifting in General Diagnosis. Remove the wheel and the tire. Refer to Tire and Wheel Removal

Question about Mercury Mountaineer

2 Answers

...replace as needed. Then remove the rear brake shoes and remaining hardware. Match the old brake shoes to the new brake shoes. Both sets should match up exactly. Then transfer hardware to new brake ...

...remove and clean and replace the rear brakes on a 2008Toyota yaris REMOVING REAR BRAKE DRUM SUB-ASSEMBLY 1. Release the parking brake and remove the rear brake drum. If the rear brake drum cannot be ...

Not finding what you are looking for?
2003 Mercury Mountaineer Logo

866 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...