2003 Mercury Mountaineer "parking brake cable usually gets" Questions

Ad

Question about Mercury Mountaineer

1 Answer

...parking brake The parking brake lever usually activates a cable that is attached to the rear drum brake. You can look for the connection at the parking break lever in the car and there many be an ...

Ad

Question about Mercury Mountaineer

1 Answer

...parking brake AND chock the rear wheels to keep it from rolling. 2. Disconnect the negative cable from the battery to remove voltage from the system. Don't want to arc yourself to the frame when you ...

Ad

...applying the parking brake? Try this when applying the parking brake. Many GM parking brake instructions require you to push the regular pedal for pressure which you lock on with the parking

Question about Mercury Mountaineer

2 Answers

Parking Brake The parking brake on my 2001 GMC jimmy wont release and don't know why? With the parking brake released go under the car and trace the parking brake cable s all the way the the rear ...

Question about Mercury Mountaineer

2 Answers

...parking brake mechanism is missing, broken, rusted? You should be able to crawl under and watch the cables being pulled as somone works the parking brake lever. If they work ok, then its time to pull ...

...parking brake cable, if it is taut (not sagging), then it is probably adjusted properly. What usually causes the parking brake cable to appear mis-adjusted (the parking brake won't hold the vehicle), ...

...cable adjusted underneath the car, but most likely the pads are getting low and the low park brake response is usually an indicator that the pads need replacement... If the pads are low , then ...

...parking brake If you have the parking brake system located in the center of the rotor, (the parking brake cable goes inside the "hub" area, and not to the caliper) you have the internal parking brake ...

Question about Mercury Mountaineer

1 Answer

parking brake wont stay engaged on 2000 s10 Do you mean that the parking brake works when you press the pedal down but the pedal does not STAY down?  If this is the case, you should look at ...

...box. (a/t) shift the shaft lever shaft by hand (cable dropped off) if will not move the tranny is rust bucket inside. to shift takes foot on brake and shift. brake lamps show dead, it can not

Not finding what you are looking for?
2003 Mercury Mountaineer Logo

866 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...