Question about Dodge Cars & Trucks
...key in run position, the only change is you have turn signals. Any suggestions on how to get the brake lights working? Check the ground cable from lights to chassis. Have a fun with family and do ...
change the ignition switch in a 96 neon? when i turn the key it makes no noise at all. the battery is good. there is no way to tell if the switch failed or the starter failed at this time. Replacing a
key to try and start the car there is nothing - no noise at all. I did try jump starting the car with no results. Any ideas????? Thanks there is a 20 amp fuse under the hood that blew on my 96 stratus
...key to, on ,off, on, off, on & leave on. (not start) now count flashes from check engine light. will be flashes, pause ,flashes for 2 digit #'s. For example: 2 flashes , pause, 2 more is code 22. ...
change your brake switch, it's the one in charge of activating brake lights when you push the brake pedal in. It's located behind the brake pedal in the upper part, and it has a connector with
...key-on cycles (normal) 13 No change in MAP from start to run 14 MAP sensor voltage too low 15 No vehicle speed sensor signal 17 Closed loop temp not reached or engine cold too long 21 02s sensor ...
key the interior light stays the same brightness level.I tested the starter relay and there is no ground at it's pin for the neutral safety switch. Can you please explain exactly how the safety switch
538 questions posted
Usually answered in minutes!
602 Questions
526 Questions
335 Questions
133 Questions
74 Questions
