Question about Mercury Cougar
...remove it from the dash. With the fascia out of the way, you will see 4 screws holding the instrument cluster to the instrument panel. Remove the 4 screws. Pull the instrument pod towards you, and, ...
...dash are burnt out. BUT, the good news is: It is EASY to pull the instrument pod.Remove the plactic fascia, and then remove the 4 bolts arounf the pos. Pull the pod towards you, top end first, and ...
dash light brightness) remove the screw behind it that holds in the gage cluster trim. Then there is another switch on the other side under the cluster (don't remember what it is) and there is another
dash clocks, one near to you, ease them back and you will feel the board come loose ) , and drops out, pull off the light switch knob and undo the nut around the switch to allow you to gently ease the
...Remove two screws to release the pod from the top of the dash. Once free, unclip the wiring loom plug and socket. Dismantle the instrument pod by removing four small screws. This will then allow you ...
remove the dashboard of my 2001 subaru forester to replace the bulbs. I get the easy bit, the removal of the two screws at the top of the facia but the surround is fixed at the bottom and I cannot see
...under ashtray and 2 torx to left of that. No need to completely remove the lower dash panel you took the screws out of. Just bend it down a little to get your hand in. You will see the 2 flasher
...remove the inside door hardware and panel to reach it. Buy a new valve ahead of time so you don't have to take it apart again. Then try the system. If it works but still not well, then get ready to ...
359 questions posted
Usually answered in minutes!
1,305 Questions
630 Questions
345 Questions
361 Questions
333 Questions