front end needs to be fixed. the entire front end of my car broke. on the passengers side the whole front end completely fell. i need to know how to fix it! thanks. it probably needs new ball joints, ...
how do u get to the plug wires There is a tool to do this but you don;t need it What needs to be done is the connector needs to be rotated side to side this will brake the seal between the porclin and
...gauge is not working Hello cehatten. To check whether it is the gauge or the sender/sensor you will need to find the sending unit sensor and jump the two pins. If it goes to full hot you will need to ...
i need a diagram for my lifters. HAYNES MANUAL IS WHAT YOU NEED IT HAS PHOTOS AND ALL INFORMATION YOU NEED TO REMOVE LIFTERS.
how to install main computer Well first you need the install disk then you need a computer to actually do and then you are all set! I still need more info.
...out, engine light on engine stalling out will cause the engine light to come on if the fuel filter needs replaced possible..... but not likely. the filter may need to be replaced, replace it every ...
how many quarters of transmittion fluid do I need to refil a 2000 mercury grand marquiz???? and I need the steps to change the transmittion fluid on the same vehicle. Thanks FB You obviously need to ...
...its been 3 days and it will not turn over radio and lights come on Sound to me like your starter needs a new set of brushes put in it.To confirm tap on the starter the next time it won't start and ...
my car needs intake manifold theromoter head gaskets and water pump. do i just need to buy a new engine or a new car? you just need the top end rebuilt by the sounds of it / that's a fairly big job to
i need to check and put in transmission fluid in my 1999 grand marquis Under the hood there will be a dipstick marked for transmission. You need to check the fluid level while the engine is running. ...
549 questions posted
Usually answered in minutes!
661 Questions
611 Questions
534 Questions
488 Questions
496 Questions