Where is the OBD terminal on a 95 sable? The 1995 Sable uses the old OBD l PCM (powertrain control module). It is located under the dash behind the glove compartment. If you are removing the PCM the ...
Question about Mercury Sable
...location of the plug for the PCM as well as a picture of the actual connector at the PCM. Disconect your battery before unplugging the PCM and check the resistance from the number 83 position at the ...
location of power control module the PCM comes out from the passenger side, the connector is inside the engine compartment, remove that and them drop the glove box down and remove the lower panel ...
wheel by the brake pedal. Remove the panel cover to access the fuses... Position 10 with 20AAMP for PCM Relay, Ignition Coil, PATS, Radio Hope this helps (remember to rate this answer)
...what gives the coil extra power to fire what engine? 3.0L 2 Valve? 4 Valve? 3.4L SHO engine? The PCM (engine computer) fires the coils, but it is never the cause of a problem. I suspect it is the ...
...looked everywhere and cannot find anything that looks like a computer. Where is that located? The pcm is installed in the firewall on the right (pass. side). But the code may not be written on the ...
Question about Mercury Sable
...location Air leaks at Air Induction System Air leaks in Exhaust Manigold Oil Dipstick not seated Fuel Injectors resticted Fuel rail pressure sensor malfunction Fuel system no supplying enough fuel ...
...location of the engine computer on a 1996 merc/ sable ,so I can get the model number so I can order a new one. Thank you. If you are looking for the powertrain control module (PCM) it is located in ...
1,096 questions posted
Usually answered in minutes!
627 Questions
642 Questions
538 Questions
533 Questions
384 Questions
