...check engine light was always on. But the car ran fine. Recently the check engine light would only flash occasionally. Now my car turns over but engine doesn't fire. The check engine light doesn't ...
...check engine light is on and I want to hook up the code reader to it but I have no idea where I hook it up to, cant find the box you can not use your code reader on the 1994, it is not OBD II but is ...
...check engine light) to retrieve the codes. Cycle the ignition key to ON , OFF , ON , OFF , ON within 5 seconds. Count the number of times the MIL (check engine light) on the instrument panel flashes ...
check engine light appears after 30 minutes of Why does the check engine light appears after 30 minutes of driving ON-BOARD DIAGNOSTICS Dodge OBD1 Pre 96 1. Cycle the ignition key ON-OFF-ON-OFF-ON ...
check engine light for flashing the code. There is delay before it starts to flash. Then it will flash and pause before it goes to the next number. for example one flash is 1, two flashes is 2, and so
...check engine light came on, dash lighs flash and transmission wont shift any ideas? It sounds like you have a problem with your security system if you mean that it won't allow you to shift out of ...
...fifty five which is the end of the flash out code sequence.so you only have a code 54 to find the meaning of which at this moment I don`t recall the code meaning. check engine flashes code 12 43 43 ...
Question about Chrysler Concorde
...check engine light flashes. the first number will be a long flash then the numbers after will be short flashes, then a pause and then the next code will flash with the first number a long flash then ...
Question about Chrysler Concorde
check engine light starts flashing. What do you suggest!!! Computer firmware needs upgrade Take your car to a Chrysler dealer shop and have them update the transmission program.As your tranny wears it
...CHECK ENGINE light. * FLASH,pause,FLASH,FLASH=code 12 The codes showed are... Fault Code 12 Description: Memory standby power recently lost Power loss light: Off Limp-in mode: None Possible Causes:* ...
413 questions posted
Usually answered in minutes!
439 Questions
405 Questions
313 Questions
285 Questions
268 Questions