1999 Chrysler Sebring "speed sensor wire location 1996" Questions

...thanksi A 3 SPD TRANS DOES NOT HAVE INPUT/OUTPUT SENSORS..ONLY A VEHICLE SPEED SENSOR..IT IS LOCATED ON TRANS EXTENSION HOUSING WHERE RIGHT SIDE AXLE COMES OUT OF TRANS..1 BOLT AND A WIRE ...

...speed sensor located? press the helpful button and follow me on fixya for more tips Input speed sensor is located inside the transmission. The sensor is located next to the sprocket for the input ...

...speed sensor on 1996 town & country i can't find the speed sensor on my 1996 town & country please discribe in lamans terms. they are on the front drivers side of the transmisson and have two wires ...

speed sensor is on the tailshaft of the transmission,on the passenger side of the car,it has 3 wires. The output sensors are located on the front of the transmission about mid-way up the housing &

...on this car do not have integrated wheel speed sensors.  The teeth are on the CV axle.  Follow the wire to the location of the speed sensor.  The sensor bolts to the side of the

...speed sensor? I remove one on top of the transmission but have two wires or cables going inside the trans 5 or 6 cylinder model TL? ==== The vehicle speed sensor (VSS) is locate on the transmission. ...

...speed sensor low imput). Would a bad speed sensor cause the shifing problem? Also, where is the speed sensor located? Thanks A faulty VSS (Vehicle Speed Sensor) or related wiring can cause both of ...

speed? Hi This sounds decidedly like a faulty or dirty MAF sensor, which is located right next to the air filter box. Unplug the wiring plug to the MAF and if all or most of the power is restored then

...speed sensor or sending unit is threaded into the transmission. You will have to get under it and locate the wire coming from the transmission. When you take it out, there is a small gear on the end ...

...speed sensor located on the transmission. There is a wire that goes from that sensor to the speedometer in the instrument cluster. Either you have a short in the wire or you may have a bad connector ...