1998 Chrysler Sebring "engine speed sensor" Questions

...engine light came on, error code PO715 DTC P0715 CHRYSLER - Input Speed Sensor 1 Circuit P0715 is detected when TCM or ECM does not receive the proper signal from the sensor. The input speed sensor ...

...ENGINE SPEED SENSOR CIRCUITWhen Monitored: Continuously after a ignition key is turned from the OFF to RUNposition and/or key is turned from the CRANK to the RUN position.Set Condition: The code is ...

...engine' light on, it is because of a faulty speed signal sensor. In case of your speedometer using the 'eddy current' technology, there could be a trouble with the connecting cable which ...

...ENGINE SPEED SENSOR BUT HOW DO I GO ABOUT FIXING IT? WHERE SHOULD I GO, WHO SHOULD I CALL OR WHAT CAN I DO TO FIX IT? p0725 is actually a transmission code your input speed sensor on the transmission ...

engine sputtering we changed the crank shaft sensor and it was fine for a few days drove great now randomly sputters at low speeds before changing crank sensor it was at 65 or higher ??? its crazy its

speed sensor. Does the check engine light come on? If the transmission isn't receiving the signal the check engine light will come on and set code. If the check engine light isn't coming on or doesn't

...controled by the ECU which is sensing the idle speed from the crank sensor which then speeds up the engine via the stepper motor .i know how it works but couldnt tell you where it is on this ...

...speed has suddenly increased. My 99 Sebring 2.5L used to idle around 500 rpm now it idles somewhere around 1,300 rpm to 1,400 rpm. Engine has 153,000 miles and has had cam sensor and crank sensor ...

sensor we changed both speed sensors same thing car was fine this morning i noticed as i pulled up to stop it seemed like the brakes locked up or something but i just happened to be breaking when this