1996 Chrysler Sebring "replace thermostat" Questions

...replace the thermostat with the correct one (parts place gave us the wrong one and it didn't fit at all...), bleed the air out of the system again and see if there's some kind of link to there having ...

...show you where it is, and how to replace it. Just make sure you put thermostat in with the right side up, clean BOTH surfsces, and tighten down as specified. Having to go back and do it again will ...

...located (to replace)? Fig. Thermostat and housing-2.0L Fig. Thermostat assembly-2.4L engine Fig. Air bleed valve (1) and thermostat housing (2) 2.7L-engine Hope helps (remember to rate

over heating location of Thermostat for a chrysler sebring 2001 2.7 l Follow the upper radiator hose to the engine. You'll see it clamp to part of the engine that has a few bolts in it. This metal ...

2007 chrysler sebring plastick name around thermostat the plastick around thermostat is cracked need to replace just dont know part name thermostat housing

replace thermastat where is it and i need a easy fix solution 2.0L & 2.4L Engines Before servicing the vehicle, refer to the Precautions section. Disconnect battery negative cable from remote ...

...thermostat area. I can fill it up with water and go about 2o miles then overheats and i can see water around what i thing is the thermostat Sounds like you need to replace the water pump and ...

thermostat replace 2002 Chrysler sebring 2.7,replaced thermostat and housing,still leaking is this a sign that my water pump seal is bad? if you cant see it leaking give up take it to a profetional

...lower rad hose going to the thermostat stays cold and the upper hose gets hot. The fans come on. I replaced the thermostat again. I'm thinking that I have a headgasket on wrong. Is that possible?

replacing thermostat locating thermostat and replacing Should b in here if it is a 4.7 l engine the thermostat housing is on the front side of the engine, down behind the alternator