1996 Chrysler Sebring "remove dash 2004" Questions

...dash.Remove the big coolant hose clamp and then the two bolts holding the thermostat housing on.Unplug the electical connection to the sensor, if you are changingthe housing unscrew the sensor and ...

...remove the entire dashboard. Any suggestions? Sounds like your heater blend doors aren't adjusting from cold to heat. If you google "blend doors" you can read about them. They are usually pretty hard ...

...dash light dimmer is generally part of a single assembly, and is replaced as a complete module. Wrong...not dimmer control. It's an inverter inside the instrument cluster. This is the whole story: ...

dash. There was some kind of funky self tapping nut on a plastic post but it went on and off easy enough. Take the glove box out and locate the 2 wires coming off the blower motor. trace these back to

...dash came on. Brought it in for an oil change, things seemed fine for a week. All the sudden my oil light came back on when coming to a stoplight and my car almost stalled out 3 times while driving ...

...dash passenger side. A rodent may have brought in debris. Continue cleaning a few more times before attempting to remove the evaporator box. Gently use a coat hanger or flexible wire to unplug hose ...

...just finished replacing mine, you know of course that it is located in the enviro box under the dash, you can remove it and replace it without removing the enviro box completely, but dash must come ...

...remove a dash board and heater box from a 2004 jeep cherokee 3.7 litre V6 I think you should be able to remove the heater core without removing the dash. I don't know why it went bad, they usually ...

...remove dash to replace heater core in 2004 jeep grand chero is there a trick to removing the dash on a 2004 jeep g.c. Need more info. Where is your hang up? If I remember correctly the Jeep dash pad ...

...it? is it in the console or dash,for console you need to remove the surrounds around T Bar to ghange the globe in there,if its in the dash you need to remove the dash cluster to replace the bulb ...