2005 Volvo XC90 "replaced ecm won 39 start" Questions

...won't go pass 1400 rpm, the speedometer doesn't work, the cruise doesn't work, the engine break doesn't work. I have to turn the truck off going down the road at highway speed for ...

replaced ecm in my 95 f259 5.8, and now it won't shift I had a problem with it starting and dying, changed ignition module, distributor and coil, but still had same problem. Replaced the ECM and ...

...replaced the battery and now the anti theft system kills the engine How do you reset the anti theft system ? replacing battery more likely erase ECM memory.best to start vechicle let enginet idle ...

...won't start. Please help!!! First of all you need to access the Engine Control Module (ECM) using suitable diagnostic equipment (VAS, VAG-COM or similar) connected to the data link connector of ...

...replaced everything possible but still won't start, most of the time the brake lights won't work, or the gauges goes crazy. I have changed relays, sensors, fuel pump, everything is new even ...

replaced ignition module now it won't run at all After changing the ignition module, you may have broken the communication between all the components in the anti theft security system. This is ...

...replaced mine with a second hand one am the serv # matches up but now since I switched it ...it turns over but won't stay started and half da time I hav to keep da gas paddle to da floor to start ...

...replaced, put in a new battery and it won't start. What else could I have blown so it won't start? it probley shorted out the brain box HOOKING BATTERY CABLES WRONG COULD SHORT OUT ALTERNATOR ...

...replaced the battery in my 05 hayabusa now im not getting any power it won't start Try to clean the throttle body air intake and rev it up a little there may be a blockage that the ECM may ...

...replaced the fuel pump and the fuel pump relay fuse. And it still won't start. What should I do now? check see if you getting spark if not.have vechicle code scan could have faulty ECM .faulty ...