1999 Jeep Cherokee "handle hood release" Questions

broken hood release handle pulls out but does not release hood latch remove the grill and pull on the cable from there. and then replace the cable.

...you spray down all three of the latches. have you tried giving the hood a little smack while someone works release handle? this may seem off the wall but it will help jar the latch worth a try any ...

...hood release hard again.If not work,trace wire inside as far as you can and get grips or pliers and pul from as far up the line as you can.If it opens as it should,you can easily unattache wire from ...

...hood release cable broke at the inside pull handle. How can I replace it? very simple the cable is attached to hood. any body with a little common should be able to do it but get a replacement first, ...

...handle. I cant grab the cable to pull it. How can I get my hood open? Generally you can use wire cutters to peel/cut back the outer casing enough to get hold of the inside cable with vise grips. The ...

hood at one of the front corners while someone else pulls the release handle. or even after you've pulled on it. if that works, once open, adjust and lubricate the hood latch assembly. if it still won

...hood to the first detent if the handle or cable is broken. There is a secondary release mechanism(called a hood tongue) which routes through the grille where the rectangular slot is once the hood is ...

...its on a 1999 passat try pressing down on edge of the hood as someone pulls the release handle. Or shake hood up and down while pulling the release cable. The cable may have broken at the latch

handle again. If the hood is completely closed and the pull handle does not pop it open, try to remove the handle slightly from the dash. This involves removing 2 phillips head screws (one from either

...on my 1984 ford 150 opens the hood but I can't find the release handle to release the safety latch. The release is under the dash to the left of the driver, reach under and pull the