1987 Jeep Cherokee "5 speed tranny" Questions

...be good. its a 5 speed stick the best bet is to get an adjustable shifter and linkage kit for it to compinsate for the lift,especialy if drop down brackets where used for the trany and other

...5 speed manuel. replces new cluch plate throut bearing , pressure plate and still makes same noise. sounds like noise is coming from front of tranny how about the fork? if it was wore it will make ...

speed sensor) this trans has no stand alone VSS sensor the 5 pin, connector to trans, has the shift solenoids, ground and VSS all as one. the VSS wires. are LG-WT (guess' light green with white stripe

what trannies came stock on 1984 CJ7 258 CID 5-speed need tranny # for stock 1984 CJ7 258 CID 5-speed T-5: The T-5 is a light duty 5 speed transmission used in CJs from 1982 until 1986

...5 speed transmission can be installed. The car will be lifted up to dismount the old one. This also need a mobile lift to hold the dismounted auto transmission and bring it down The mobile lift will ...

5 speed tranny just bought a 1990 toyota pick up 22R 4 speed trans. everything good except transmission. 5 speed tranny came with the purchase, however when looking at the unit under the right side of

...5 or a 6 speed. Before 2004 only the 5 speed was used. If one is changed for the other there will be shifting issues and codes set in both the ECM (engine control computer) and TCM (transmission ...

5 speed tranny i have a ba5 or ba10 peugeot 5 speed. reverse is gone. i'm in the prose of taking the tranny apart. the studs that are in the front that hold the bell housing on. how do you get them ...

5 speed dodge tranny compatability Will a tranny from a 1989 2.5l Labaron work in my 1985 Dodge Caravan. Yes my Caravan currently has a 5 speed. Thanks, Mike It will bolt up fine, but the 89 lebaron ...

5 speed trans. hung in 4th gear 2003 ford ranger 4X4, 5 speed. Can;t be sure on this one except to tell you that you may have a bent or broken shift fork in the tranny. The only way to find out is to ...