1990 Honda Civic "cam timing" Questions

...timing marks on the cam gear and put the belt on If it won't line up with a timing light when you rotate the distributor the the cam gear is a tooth off. Line up the crank to the notch by itself. ...

timing in those engine! well time the cams. it should say up on each of the cam gear and when you have the two cam gears in the up position. there should be a dot facing each other on the cam. then on

...cam belt on a 1500cc sohc v-tec does the belt its self have to be lined up to any thang??or do the cams have to line up with the cranck cause i've relased the tentioner and i didint really mark it to ...

...timing belt my son left the cam sensor lose, now I need to tighten the cam sensor but I have not been able to find out what the clearance should be. Well most cam sensors are set at an exact location ...

...cam timing? its complicated but roughly it is where your cam is in relation to the position of your pistons. be careful if its off you can lunch the motor by a valve hitting the top of a piston then ...

...CAM position sensor, located behind the timing cover. Here's the info for it: part # 370598 SENSOR ASSY., TDC CYLINDER Retail: 49.32 Wholesale: 36.99 That error comes from the CAM SHAFT POSITION ...

...explain why there is only compression in once cylinder. Sure the timing belt may be in tact, but if the cam guide pin is sheered off, and bolt that holds gear to the cam is loose, it will cause

cam and any of the valves are open they are probably bent, this can happen if the timing belt is out of time the pistons hit the valves, if that's the case have the valves replaced and check the heads

...This engine has Three sensors that keep the engine running crank,TDC,cam. The TDC and CAM are in the distributor and crank is behind timing belt cover. Check the Main Relay and fuse. Hope this