2000 Chrysler Sebring "crankshaft sensor convertible" Questions

...sensor and the Crankshaft position sensor (CKP sensor) On 1997 Chrysler Sebring 2.5L MFI 6cyl... - the PCM is located in the left side of the engine compartment, beside the Power Distribution Center ...

...Crankshaft Pos. Sensor error from "turn on- turn off-turn on-turn off-leave on" is this what is now keeping it from starting? and where is it? Here's a how-to video - ...

location of crankshaft sensor chrysler sebring convertible 2.7 liter 6 cyl Heres adiagram to help you, its located at right rear of motor.

1999 sebring dies after driving but will start after it sets for a while I had same exact problem with my 1999 Sebring Convertable jxi, Problem ended up being a bad Crankshaft Positioning Sensor

Crank no fire to spark plugs on my 2003 crystler sebring convertible My first guess would be crankshaft sensor

convertible and than i can not go over 2250 rpm that means i can not go over 60 miles ... how can i fix it i have no idea ; i change all the sensors which computer says (camshaft , crankshaft , oxgyen

crankshaft position sensor in my 97 sebring 2.5 l convertable and still no spark. These engine are know for having bad distributors. The parts store stocks them. There are two different ones. You have

Crankshaft Sensor retainer bolt. Now pull the Crank sensor strait up. Remove the connector. Remember you MUST add a NEW spacer to the sensor face before installation. The diagram for this installation

...crankshaft position sensor, I have also seen distributor issues with these cars, I have also seen these cars go into anti-theft mode, even when the cars are not equipped with a factory security ...

...crankshaft positioning sensor on a kind of slotted adjustable setup running off the torque converter through the transmission bellhousing. I have put them together before and the car ran with a heavy ...