1999 Chrysler Town & Country "gear" Questions

won't stay in gear 1996 Chrysler Town and Country. Cold or warm The tranny won't stay in gear. When it's put in gear it has to be reved up to about 1800 before it "catches". While driving,(no matter ...

I would remove the starter motor and check 2 things first is the condition of the teeth on the ring gear they have a habit of burring over and the pinion gear gets stuck and will not disengage next is

...do you you replace.... remove the old one Before you do anything with the ignition key check the gear shift lever is not stuck in gear or there is no problem with the transmission. I am assuming ...

Transmission on 95 town&counrty (41te) locked up suddenly,in all gears with engine running, couldnt push vechile in any gear,by hand with it running, encluding netural,turn key off, can push ...

what stops my transmission from going into gear? my gear selector has no problem moving by the van will not move, transmission fluid is full. it just wont shift into any gears your tranny is shot,like

Automat Gear does not shift in 40MPH When the car get to ~40MPH the gear does not shift and it remain in the current gear (assuming third if it was a manual gear). When this is happening, the ...

When I drive slow or faster than 80K my gear stays on Gear one (I have automatic gear) and I am getting a loud noise from my engine and I tooked to a repair shop by he said he can't do it only ...

...have error P0733 town&country 2001 after repair automatic transmission P0733 indicates which gear has a gear ratio that varies from the correct gear ratio, the corresponding in-gear trouble ...

...wants to "buck" Help sounds like the transmission is slipping and not engaging the next gear. could have a bad gear or the hydrualic transmission isnt matching up the ...

will not stay in gear when in over drive 1997 town and ccountry van as long as it is cin 3rd gear will operate normally all day long but when you put it in over drive it will shift through all the ...