2003 Suzuki Aerio "steering lock" Questions

...LOCK CYLINDER IF STEERING WHEEL IS LOCKED THAT SURELY COULD CAUSE IT Take wd 40 spray in lock put key in clamp vice grip to key turn back and forth while moving steering side to side it will free ...

Suzuki areo 2002...steering wheel is locked. I can't get it unlocked. Any suggestions? Thanks; Stuck try pulling and pushing on the steering wheel as you wiggle the key

lock position, and it will not release you have to turn the steering wheel a little back and forth hard until it releases it probably locked in hard when you parked it there is tension on it just move

...wont turn in my 2003 suzuki aerio Hi, Just spray some DW40 in the ignition switch. Then put the key in and turn and wiggle it. If you have steering lock work it some more till it does.Good

lock crankshaft pulley, use special tool 09917-68221 (camshaft pulley holder). Be sure to use the following bolts instead of pins for fixing special tool to crankshaft pulley. Bolt size: M8, P1.25 L =

...lock crankshaft pulley, use special tool 09917-68221 (camshaft pulley holder). Remove crankshaft pulley. To remove crankshaft pulley, use special tools 09944-36011 and 09926-58010 (steering wheel ...

...steering column lock cylinder set (1). Turn the key to the "START" position. Install a 1/16 allen wrench (2) into the hole on top of the lock module assembly in order to release the steering column ...

...steering lock bracket. Insert key into steering lock cylinder, and turn to ACC position. Using a small Phillips screwdriver, push cylinder lock pin inward. On all models, remove ignition switch, ...

...steering lock is mechanical and has nothing to do with the actually running of the engine so i am presumming that the car was idling stalled on its own and the steering as you tried to restart it ...

...steering lock no longer works is very worrying, most times the key not going past position 1 is due to the steering lock being actuated and the pressure in it has to be released before the key will ...