1992 Plymouth Laser "replace clutch slave cylinder 92" Questions

i have a 92 plymouth laser, 5 speed. it has no pressure on the clutch and it takes pumping the clutch to get it into gear. what should i do? replace the clutch slave cylinder

...https://www.google.com/search?q=92+geo+storm+replace+clutch+slave+cylinder .. No! The slave cylinder is on the side of the

slave line bc of a break. Any suggestions how to get clutch pressure without having to go buy new lines? The rubber line is probably not allowing hydraulic pressure to build at the slave cylinder- you

...correct side? The clutch bearing is correct on high? Does the slave or master cylinder works ok? do they keep steady pressure when needed? Is the clutch kit the correct part according to engine

...replace it ...

...clutch Master and Slave cylingers have been replaced and it worked for about a week and now it will not shift into any gear. the clutch pedal goes to the floor it will only shift if the engine is off ...

...clutch master. If the fluid is full but you aren't getting any pressure to the slave, likely the master is internally bypassing. ]Some systems use a throwout bearing and slave unit that are integral ...

clutch resevoir. if your losing fluid the slave cylinder is probably failing or the clutch master cylinder is got bad seals either way one must be replaced the slave cylinder is in the bellhousing and

clutch slave cylinder would be mounted on the bell housing close to the transmission. It will be cylindrical, about maybe 3-4 ins long, have a rubber boot on one end with a pushrod protruding through.