1996 Jeep Grand Cherokee "replaced abs module light flashes" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...ABS/ Trottle Position/ MAP/ IAC/ a/c Pressure/ Ambiant air Temp/ Injectors -- Gauges did not return. Replaced -- Plugs/ Wires/ Cap/ Rotor/ Pickup(cam sesor under distributor)/ Coil/ Crank Sensor ...

Ad

...and beeping. The Abs module shows error: ABS valve malfunction flow to pump. I appreate your advice of how we can fix this? - check sensors abs. - Cleaning sensors abs. - Replace new sensors

Ad

Question about Jeep Grand Cherokee

1 Answer

abs module with snap on solus, can communicate with PCM< AIR BAG,and instrument cluster,have checked 2 b+ circuits to module 1 Ign. + circuit 2 Ground circuits all at bcm The ABS controller has

Question about Jeep Grand Cherokee

2 Answers

...ABS module Open dump valve circuit or defective ABS module Grounded or closed RABS or RWAL valve switch Excessive actuations of dump valve during ABS braking Erratic speed sensor signal Shorted ...

Question about Jeep Grand Cherokee

1 Answer

...ABS module. If you do have this problem, go to www.modulemaster.com and call them - they can rebuild the ABS module for a couple hundred dollars give or take, versus several times that cost for a new ...

Question about Jeep Grand Cherokee

1 Answer

ABS light on 4WD light flashes intermitantly replaced CVaxle and speed sensors on left an left front wheels U2023 External Node Fault DTC ABS Module REFER to Section 418-00 . U2023 Fault Received From

...ABS module. Module receives the speedo signal and sends it to the speedo and the transmission module. The transmission module needs the signal to know when to shift the trans. It is going in to limp ...

Question about Jeep Grand Cherokee

1 Answer

...abs module need to be replaced- what to do? also remote will not start the vehicle-the lights flash, doesn't do anything- what's the problem check the abs rings on the axles they have a tendency to ...

Question about Jeep Grand Cherokee

1 Answer

...ABS motor module is no good. Why because the ABS motor pistons are not at it proper postion. Remember engine off we tested brakes without the ABS. Key on engine running we now test ABS. if it sink at ...

Question about Jeep Grand Cherokee

1 Answer

...stop working.see if anti lock brake module detect fault in brake switch circuit .anti lock brakes stop working.your brake light and abs light will come on.if this dont help.take it to

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

4,552 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...