Question about Isuzu Trooper
...Top Dead Center. 014RW003 Legend (1) Alignment Mark on Oil Pump (2) Groove on Crankshaft Timing Pulley (3) Alignment Mark on Crankshaft Timing Pulley (4) Alignment Mark on Timing Belt ENGINE ...
top dead center on the compression stroke. pull the plug and rotate the engine with your finger over the plug hole. on the harmonic balancer( crankshaft pulley) you will feel pressure in the plug hole
...top dead center. This static timing is all that matters and the computer will be able to control the timing as long as the ignition rotor is in that position when the engine is at top dead center. 1. ...
Question about Isuzu Trooper
...top dead center - When throttle positionsensor disconnected and using suitably programmedscan tool.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (750-850 ...
...top dead center, at specified curb idle speed. Locate data link connector & connect jumper wire between ground & engine test terminals. After completing adjustment, remove jumper wire. Curb ...
Question about Isuzu Trooper
...top dead center where do the cams need to be placed,with out the chain and gears. With the number one piston at top dead center the intake cam lobe on the number one cylinder will face 9 o'clock and ...
...top dead center. This static timing is all that matters and the computer will be able to control the timing as long as the ignition rotor is in that position when the engine is at top dead center. 1. ...
...Top Dead Center), each mark after the wide mark represents 2, 4, 6, 8 and 10 degrees before TDC. Set timing 3 degrees BTDC (Before Top Dead Center). In addition, valve timingis set like this: Intake ...
...top dead center through plug hole. use a straw or similar to tell if piston is all the way up. turn engine at the crankshaft damper bolt by hand. if it gets to top dead center, then rotor will be ...
...top dead center marks Wow! I did not know that 1993 had a top dead center! Okay, so 1993 had between 365 and 366 days in it, so divide 365.5 by two, and you get 182.75 days. My guess it it would fall ...
409 questions posted
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
323 Questions
317 Questions