2000 Chrysler Town & Country "ignition lock" Questions

Ignition switch? For JUST the Lock Cylinder: 1. Disconnect the negative side of the battery. 2. Remove the lower steering column cover under the steering column. It has three (3) screws. 3. Insert the

ignition key forward or back. I know it is related to the lock, but steering wheel is not locking either. I can turn it quite far in both directions. Car has been in park overnight You need to replace

...ignition switch [not to be confused with the lock cylinder, where you insert the key] The power door locks should always have power. Check ALL the fuses both under the hood [next to the battery] and ...

...lock by turning the wheel in the locked direction and try to turn the key. I experienced the same issue. Cold weather, along with wet air or humidity appears to possibly play a part in the ...

...lock. Can not get key to turn. This is a very simple and inexpensive fix. If you look at your steering wheel on the underneath right side of your ignition you will see a small hole small enough for ...

...with key removed. Running lights also stay illuminated. 2006 Chrysler Town and Country. think the ignition lock contacts have collapsed ,need a new ignition switch on the back end of the steering ...

...ignition key will not move to lock position and the key will not release. Usually after turning the engine back on and moving thru the gears several times the key magically turns to lock position and ...

Ignition Switch Locks up Steering wheel does not lock and key will not turn in either direction. Jigging the steering wheel does not help. I removed the plastic steering column cover and key will turn

lock it. Keys were in ignition? these things lock themselves ,i always leave a window or a side door open when servicing these vehicles ,also a astro van as well will lock itself after a while .Doesnt

Not able to turn my ignition key on or shift any gears. Both are locked out. My Chrysler Town and Country is only 2 years old. Is the ignition at fault or are there other steps to resolve this problem