1999 Subaru Forester "hold button" Questions

...Hold At'' button is for Icy conditions, but the problem is : when I turn on the ignition (without starting the car'' the light ''hold at'' comes on, but when I start the car, the light turns off ...

...button labeled "Hold AT" what is the purpose of this button? cheers, Carl hey hold AT is for icy conditions where you want the car not to change gear, (loss of traction/power) and my Subaru manual ...

...Some cars have a button that can turn on a different shift program for the transmission, usually holding gears longer and firming up shifts. Once you locate this button press it again and the

...a small button on it. Just push and hold the button for about 15 secounds and it will reset itself. That should stop the marker lights from flashing. Good luck and hope this helps. Have a great

...button reding HOLD just beside the Hand break what is this for?? my email is [email protected] The fuel consumption sounds about right for a turbo, perhaps a little high. Hwy consumption depends on ...

if the switch is on. The hold button keeps the car out of first gear so it will take off in 2nd and will try to change to 3rd or 4th as soon as possible to stop sliding on snow or ice. Hope this helps

...button should i push and hold to reset i have a subaru 2002 forester Hello there : What you can do also is to take the vehical to autozone and have them hook up the handheld diagnostic center to the ...

...hold lock button for approx. 3-4 seconds to activate Panic mode. I panic model the horn honks and turn signals flash until either the lock or unlock button is pushed again. Finder mode: Press lock ...

hold down the unlock button on your remote for 2-3 sec - the flashing light will go out and your system should be back to normal it's too bad the manual doesn't supply information about activating and

on" while still holding in the odometer reset button 4. Hold in the odometer reset button until all of the warning lights have lit - after about 10 seconds the "maintenance required" light will go off