2004 Lexus LS 430 "striker" Questions

drivers door latch will not engage door striker. it hits striker but will not stay over center and door closer does not activate well, look and see if the striker has slipped back, then, look at the ...

...ave. Is the bottom part of the latch supossed to be at an angle? CHECK FOR LOOSE BOLTS AT THE LATCH STRIKER IF BOLTS LOOSE MOVE STRIKER TO CORRECT POSITION SLOWLY CLOSE TRUNK LID UNTIL THE TRUNK LID ...

...door is closed. is black and held on by 2 star bolts The door latching mechanism closes around the striker plate, or striker, or striker

best way to fix metal failure behind striker on drivers door metal behind striker has spilt four ways and door will need new hinge pins but i need the metal fixed first i would weld the metal add a ...

Gmc Sierra Tailgate wont shut I have a 2004 Gmc sierra 2500 HD and need to find out what the bolts are that look like Strikers. I need to replace one and was told they were strikers but cannot find ...

...the engine back to the frame. If everything is OK then remove the motor and examine the electrical striker plates inside the motor body...you will have to open the motor up on the bench. The striker ...

need to replace rear door strikers i need to replace the rear door striker bolts on my 1996 lincoln town car. is it an easy out & in , or do i need to have some alignment tool to align everything up? ...

door wont stay shut my suburban door will not shut its like the thing that hits the door striker wont hold my door shut what could be wrong with it? The door latch could be closed, in other words, the

...randomly pops open while driving on highways , what could the cause be and how can i fit it ? The striker assembly may be out of adjustment. This is the metal piece that the trunk lock assembly ...

trunk won't close I keep adjusting the striker but the trunk periodically refuses to close and i have to adjust the striker again If after every re-adjustment the trunk close only to refuse to close ...