2003 Jeep Liberty "replace coil" Questions

...coil is too hot to touch. Also checked spart plugs, looks like it is time to replace them .065in gap. Why won't this thing start? Well, some things need to be done systematically. Check for spark to ...

...and off). Compression(wash down, worn rings, belt or burnt valves...). Try swapping coils and see if the misfire moves to another cylinder if it does replace the bad coil. the module which hold

coil pack. (sorry don't know the correct name for part.) I have no idea how to replace wires. It's pretty basic on this. Test your clip by plugging it into the coil first, and make sure that it is the

...coil O-ring (2) and replace as necessary. To aid in coil installation, apply silicone to coil O-ring (2). 3. Position ignition coil (1) into cylinder head opening and push onto spark plug. Do this ...

...the coils from a known good cylinder and see if the same cylinder is still misfiring. if so then replace the coil and the spark plug and or all the spark plugs. those coils are prone to

coil in the Blower Fan resistor block has failed. The Blower Fan Resistor Block is usually located in the air ducting adjacent to the Blower Fan. The Resistor Block consists of 3 or 4 coils of special

no spark on cyls 2 & 4 Replaced plugs and coils only to find there is no spark at those 2 cyls only. Checked #1 and it had spark, put that coil and plug on 2 and 4 connector and no spark? double ...

...coil. To replace it requires the very dangerous airbag system be disarmed and the steering wheel removed, it is directly under the wheel. Before replacing any parts have the problem diagnosed to ...

...reading coil 6 is bad and it is still clicking. We did check the wire and it appears to be ok. What is up with this thing? You have a bad lifter on #6. Replace it before it wears out the cam

replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In