2000 Jeep Grand Cherokee "belt removal" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...removal. Air Pump Drive Belt Loosen the adjusting arm bolt slightly. If necessary, also loosen the mounting bolt slightly and remove the drive belt. To install: Holding the pump in place, install the ...

Ad

...belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the bel. Using the proper size socket, remove the tensiones mounting bolt ...

Ad

Question about Jeep Grand Cherokee

1 Answer

Alternator and belt tension What is needed to remove and replace alternator from Jeep Grand Cherokee 2002 I removed the alternator for my 2002 Jeep Grand Cherokee. I started by removing the belt, by ...

...REMOVAL Disconnect negative battery cable from battery. Drain cooling system. Refer to Draining Cooling System in this group. Do not waste reusable coolant. If solution is clean, drain coolant into a ...

...Removal of the Belt.You will need to Locate the Belt Tensioner. It has a Large Pulley on a Bracket that Has a Bolt in the Middle and a Smaller Pulley that Goes Under the Belt and Holds Tension on it. ...

Question about Jeep Grand Cherokee

1 Answer

replacing serpintine belt where's the adjustment to remove old belt? There will be a slack adjuster, a flat roller you loosen off it will most likely be spring loaded that will allow you to remove and

Question about Jeep Grand Cherokee

1 Answer

...belt will come right off. Remove the wires from the back of the alternator and remove the bolts holding it in place. The install is reverese of removal. IF you need more help go to you local auto ...

Question about Jeep Grand Cherokee

1 Answer

how do I replace the S belt First thing to do is to have an copy of the belt routing diagram . It must be under the hood or in your manual. The belt tensioner is located on the top center of the ...

Question about Jeep Grand Cherokee

1 Answer

...8 drive ratchet, or suitable size wrench, to hold back onto the tensioner to release the serpentine belt, once this is done, then take the appropiate size socket and ratchet and remove the bolt that ...

Question about Jeep Grand Cherokee

1 Answer

...1996 jeep grand 4.0L how long to remove and replace? It's easier to remove the radiator, fan and belt. in order to remove you will need to remove the cover over the radiator. It sounds like a lot ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...