2000 Jeep Cherokee "dtc code commander" Questions

Ad

DTC P1727 - 4c hydraulic pressure switch circuit- this is set if pressure switch doesnt close on command from the TCM(transmission control module) There are wide ranging possible causes: open in trans

Ad

code comes up with po704? the book is free,but pdf searched not.
i have a pile of ZJ jeep FSM books, factory
searches find no 704, (no such animule, pun)
so what scan tool produced this gem.?

Ad

Question about Jeep Cherokee

1 Answer

code . DTC P0506 Circuit Description The throttle actuator control (TAC) motor is controlled by the powertrain control module (PCM). The DC motor located in the throttle body drives the throttle plate

Question about Mitsubishi Cars & Trucks

1 Answer

...Code DTC P0144 is not a valid code for your Montero.  It is also not a purge solenoid code even if it was a valid code.Do you mean DTC P0441?The computer commands the purge solenoid to open and ...

...DTC P0758 sets when one of the following conditions occurs for 5 seconds: Condition 1 The PCM commands the solenoid ON and the voltage feedback remains high, B+. Condition 2 The PCM commands the ...

...an has a DC motor that controls the opening of the throttle plate . Can set a bunch of different DTC'S - diagnostic trouble codes . A dirty throttle body can cause idle problems . Is a yellow ...

...B0057, B0058, or B0059 DTC B0064, B0065, or B0066 DTC B0077, B0078, B0079, B0080, B0081, or B0082 DTC B0100, B0101, B0102, B0103, B0104, or B0105 DTC B1001 Doesn't do the flashing light code thing

Question about Cars & Trucks

1 Answer

...code po826 The TAP Shift system allows the driver to manually shift gears by using the TAP Shift switches located on the Automatic Transmission Shifter. Pushing the Up switch will command an upshift ...

...Code PO982 SHOWED AS SHIFT SOLENOID D CONTROL CIRCUIT LOW INTERMIITENT No shift solenoid D in your transmission . DTC P0982 Shift Solenoid (SS) 4 Control Circuit Low Voltage The 3-4, 4-5 shift ...

Question about Jeep Cherokee

1 Answer

...DTC P1441 will be set. Again, this code would be best diagnosed with a scan tool that can command the purge valve and allow you to watch the data related to it. Check your vacuum lines and electrical ...

Not finding what you are looking for?
2000 Jeep Cherokee Logo

902 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...